---
title: "Connect Your Mailboxes from InboxKit to Smartlead: Everything You Need to Know"
description: "This article will help you understand how to connect your Smartlead account to InboxKit and export your mailboxes..."
url: https://help.inboxkit.com/en/articles/27-connect-your-mailboxes-from-inboxkit-to-smartlead-everything-you-need-to-know
collection: "Mailbox Export & Integrations"
updated: 2026-10-30
language: en
---

# Connect Your Mailboxes from InboxKit to Smartlead: Everything You Need to Know

This article will help you understand how to connect your Smartlead account to InboxKit and export your mailboxes...

Connecting your **SmartLead sequencer** inside **InboxKit** allows you to seamlessly export your newly created mailboxes directly into SmartLead for your outreach campaigns. This guide walks you through the full connection process, how to enable Auto Export, and how to avoid common export issues.

* * *

## **1\. How to Connect SmartLead in InboxKit**

Follow these steps to set up your SmartLead sequencer:

### **Step 1: Go to the Sequencers Section**

-   From the left sidebar, click **Sequencers**.
    
-   Then click **\+ Add Sequencer**.
    

### **Step 2: Choose SmartLead**

-   On the platform list, select **SmartLead**.
    

* * *

### **Step 3: Enter Your SmartLead Credentials**

You will be asked to enter:

-   **Email** → your SmartLead login email
    
-   **Password** → the same password you use to log into SmartLead
    
-   **Consent URL (Optional)** → only required if SmartLead specifically provides one
    

Once filled, click **Connect SmartLead**.

InboxKit will verify your credentials and complete the connection.

* * *

## **2\. Enable Auto Export (Recommended)**

Turning on **Auto Export** ensures that:

-   Every time you create & activate new mailboxes in InboxKit,
    
-   They will be **automatically exported to your SmartLead account**,
    
-   Without needing to manually trigger an export job.
    

This helps keep SmartLead synced with InboxKit at all times.

* * *

## **3\. How to Manually Export Mailboxes to SmartLead**

If Auto Export is off or you want to export manually:

1.  Go to **Exports** in InboxKit.
    
2.  Click **Create Export**.
    
3.  Select **SmartLead** from the sequencer list.
    
4.  Choose the mailboxes you want to export.
    
5.  Click **Create Export Job**.
    

InboxKit will push selected mailboxes to SmartLead within a few minutes.

* * *

## **4\. Common Export Issues & How to Fix Them**

If an export fails, it’s usually due to one of the following reasons:

### **1\. Incorrect Login Credentials**

Make sure your SmartLead **email and password** match exactly with your SmartLead account.

### **2\. Wrong or Missing Workspace Name (If Applicable)**

Some SmartLead setups may require a workspace-specific environment.

### **3\. No Active Subscription in SmartLead**

SmartLead must have an active plan to allow API-based mailbox imports.

### **4\. Two-Factor Authentication (2FA) Enabled**

If 2FA is turned on inside SmartLead, connection attempts may fail.  
Disable 2FA and try again.

Once these points are corrected, exports will complete normally.

* * *

## **Your SmartLead Sequencer Is Now Ready**

You’re all set — SmartLead is now connected to InboxKit, and your mailboxes can sync smoothly using manual or Auto Export.

## Related

- [Connect Your Mailboxes from InboxKit to Instantly: Everything You Need to Know](https://help.inboxkit.com/en/articles/4-connect-your-mailboxes-from-inboxkit-to-instantly-everything-you-need-to-know.md)
- [Connect Your Mailboxes from InboxKit to EmailBison: Everything You Need to Know](https://help.inboxkit.com/en/articles/38-connect-your-mailboxes-from-inboxkit-to-emailbison-everything-you-need-to-know.md)
- [Connect Your Mailboxes from InboxKit to Za-Zu: Everything You Need to Know](https://help.inboxkit.com/en/articles/39-connect-your-mailboxes-from-inboxkit-to-za-zu-everything-you-need-to-know.md)
- [Connect Your Mailboxes from InboxKit to Emelia: Everything You Need to Know](https://help.inboxkit.com/en/articles/41-connect-your-mailboxes-from-inboxkit-to-emelia-everything-you-need-to-know.md)
- [Connect Your Mailboxes from InboxKit to Lemlist: Everything You Need to Know](https://help.inboxkit.com/en/articles/43-connect-your-mailboxes-from-inboxkit-to-lemlist-everything-you-need-to-know.md)