---
title: "Connect Your Mailboxes from InboxKit to Emelia: Everything You Need to Know"
description: "This article will help you understand how to connect your Emelia account to InboxKit and export your mailboxes..."
url: https://help.inboxkit.com/en/articles/41-connect-your-mailboxes-from-inboxkit-to-emelia-everything-you-need-to-know
collection: "Mailbox Export & Integrations"
updated: 2026-09-27
language: en
---

# Connect Your Mailboxes from InboxKit to Emelia: Everything You Need to Know

This article will help you understand how to connect your Emelia account to InboxKit and export your mailboxes...

InboxKit allows you to seamlessly connect your mailboxes to Emelia so you can automate outreach without any manual setup. This guide covers how to connect Emelia, configure exports, enable Auto-Export, and troubleshoot common issues.

* * *

### 🔗 Part 1: Connect Emelia to InboxKit

Follow these steps to integrate your Emelia account:

**Step 1: Go to Sequencers**

-   From your InboxKit dashboard, navigate to **Sequencers** (left sidebar).
    
-   Click **\+ Add Sequencer**.
    

**Step 2: Select Emelia**

-   Choose **Emelia** from the list of available platforms.
    
-   You will see two required fields: **Email** and **Password**.
    

**Step 3: Enter Your Emelia Credentials**

Fill in the following:

-   **Email** – the same email you use to log into Emelia
    
-   **Password** – your Emelia login password
    

Finally, click **Connect Emelia**. Your sequencer will now appear in the Sequencers list with a connected status.

* * *

### 📤 Part 2: Export Your Mailboxes to Emelia

After connecting Emelia, you can export mailboxes manually or automatically.

**Manual Export**

1.  Go to **Exports** in InboxKit.
    
2.  Click **Create Export**.
    
3.  Choose **Emelia** as your sequencer.
    
4.  Select the mailboxes you want to export.
    
5.  Click **Create Export Job**.
    

Exporting usually completes within 5–30 minutes. Once done, your mailboxes will appear inside Emelia under your sending accounts.

* * *

### ⚡ Auto-Export (Recommended)

InboxKit also supports **Auto Export**, which saves you time.

When enabled:

-   New mailboxes you purchase and activate will automatically sync to Emelia.
    
-   No need to manually trigger exports every time you scale.
    

**To turn it on:**

-   Go to **Sequencers → Emelia → Settings**
    
-   Enable **Auto Export**
    

* * *

### ❗ Export Failures: Common Reasons & Fixes

If your export fails, it is usually due to one of the following:

**1\. Incorrect Credentials**

Ensure:

-   Your Emelia login email is correct
    
-   Your Emelia password is correct
    

**2\. Subscription Expired in Emelia**

You must have an active Emelia subscription. If the subscription is inactive, export will fail.

**3\. Two-Factor Authentication Enabled (2FA)**

Emelia does not support API login or mailbox sync with 2FA enabled. Disable 2FA temporarily from Emelia settings.

**4\. Emelia Account Limits**

If your Emelia plan has reached mailbox limits, new mailboxes cannot be added. Upgrade your plan or remove unused mailboxes.

* * *

### 🎯 You're All Set

Once connected and exported, your mailboxes will be ready for sending campaigns inside Emelia—fully warmed, authenticated, and optimized by InboxKit.

## Related

- [Connect Your Mailboxes from InboxKit to Instantly: Everything You Need to Know](https://help.inboxkit.com/en/articles/4-connect-your-mailboxes-from-inboxkit-to-instantly-everything-you-need-to-know.md)
- [Connect Your Mailboxes from InboxKit to Smartlead: Everything You Need to Know](https://help.inboxkit.com/en/articles/27-connect-your-mailboxes-from-inboxkit-to-smartlead-everything-you-need-to-know.md)
- [Connect Your Mailboxes from InboxKit to EmailBison: Everything You Need to Know](https://help.inboxkit.com/en/articles/38-connect-your-mailboxes-from-inboxkit-to-emailbison-everything-you-need-to-know.md)
- [Connect Your Mailboxes from InboxKit to Za-Zu: Everything You Need to Know](https://help.inboxkit.com/en/articles/39-connect-your-mailboxes-from-inboxkit-to-za-zu-everything-you-need-to-know.md)
- [Connect Your Mailboxes from InboxKit to Lemlist: Everything You Need to Know](https://help.inboxkit.com/en/articles/43-connect-your-mailboxes-from-inboxkit-to-lemlist-everything-you-need-to-know.md)