---
title: "Connect Your Mailboxes from InboxKit to MailToaster: Everything You Need to Know"
description: "This article will help you understand how to connect your MailToaster account to InboxKit and export your mailboxes..."
url: https://help.inboxkit.com/en/articles/44-connect-your-mailboxes-from-inboxkit-to-mailtoaster-everything-you-need-to-know
collection: "Mailbox Export & Integrations"
updated: 2026-06-05
language: en
---

# Connect Your Mailboxes from InboxKit to MailToaster: Everything You Need to Know

This article will help you understand how to connect your MailToaster account to InboxKit and export your mailboxes...

## Connect Your Mailboxes to MailToaster: Everything You Need to Know

InboxKit allows you to seamlessly connect your mailboxes to MailToaster so you can automate outreach without any manual setup. This guide covers how to connect MailToaster, configure exports, enable Auto-Export, and troubleshoot common issues.

* * *

### 🔗 Part 1: Connect MailToaster to InboxKit

Follow these steps to integrate your MailToaster account:

**Step 1: Go to Sequencers**

-   From your InboxKit dashboard, navigate to **Sequencers** (left sidebar).
    
-   Click **\+ Add Sequencer**.
    

**Step 2: Select MailToaster**

-   Choose **MailToaster** from the list of available platforms.
    
-   You will see three required fields: **Email**, **Password**, and **Sender Name**.
    

**Step 3: Enter Your MailToaster Credentials**

Fill in the following:

-   **Email** – the same email you use to log into MailToaster
    
-   **Password** – your MailToaster login password
    
-   **Sender Name** – the display name that will appear on your outgoing emails (e.g., "John Smith" or "Sales Team")
    

Finally, click **Connect MailToaster**. Your sequencer will now appear in the Sequencers list with a connected status.

* * *

### 📤 Part 2: Export Your Mailboxes to MailToaster

After connecting MailToaster, you can export mailboxes manually or automatically.

**Manual Export**

1.  Go to **Exports** in InboxKit.
    
2.  Click **Create Export**.
    
3.  Choose **MailToaster** as your sequencer.
    
4.  Select the mailboxes you want to export.
    
5.  Click **Create Export Job**.
    

Exporting usually completes within 5–30 minutes. Once done, your mailboxes will appear inside MailToaster under your sending accounts.

* * *

### ⚡ Auto-Export (Recommended)

InboxKit also supports **Auto Export**, which saves you time.

When enabled:

-   New mailboxes you purchase and activate will automatically sync to MailToaster.
    
-   No need to manually trigger exports every time you scale.
    

**To turn it on:**

-   Go to **Sequencers → MailToaster → Settings**
    
-   Enable **Auto Export**
    

* * *

### ❗ Export Failures: Common Reasons & Fixes

If your export fails, it is usually due to one of the following:

**1\. Incorrect Credentials**

Ensure:

-   Your MailToaster login email is correct
    
-   Your MailToaster password is correct
    
-   Your Sender Name is properly formatted
    

**2\. Subscription Expired in MailToaster**

You must have an active MailToaster subscription. If the subscription is inactive, export will fail.

**3\. Two-Factor Authentication Enabled (2FA)**

MailToaster does not support API login or mailbox sync with 2FA enabled. Disable 2FA temporarily from MailToaster settings.

**4\. MailToaster Account Limits**

If your MailToaster plan has reached mailbox limits, new mailboxes cannot be added. Upgrade your plan or remove unused mailboxes.

* * *

### 🎯 You're All Set

Once connected and exported, your mailboxes will be ready for sending campaigns inside MailToaster—fully warmed, authenticated, and optimized by InboxKit.

## Related

- [Connect Your Mailboxes from InboxKit to Instantly: Everything You Need to Know](https://help.inboxkit.com/en/articles/4-connect-your-mailboxes-from-inboxkit-to-instantly-everything-you-need-to-know.md)
- [Connect Your Mailboxes from InboxKit to Smartlead: Everything You Need to Know](https://help.inboxkit.com/en/articles/27-connect-your-mailboxes-from-inboxkit-to-smartlead-everything-you-need-to-know.md)
- [Connect Your Mailboxes from InboxKit to EmailBison: Everything You Need to Know](https://help.inboxkit.com/en/articles/38-connect-your-mailboxes-from-inboxkit-to-emailbison-everything-you-need-to-know.md)
- [Connect Your Mailboxes from InboxKit to Za-Zu: Everything You Need to Know](https://help.inboxkit.com/en/articles/39-connect-your-mailboxes-from-inboxkit-to-za-zu-everything-you-need-to-know.md)
- [Connect Your Mailboxes from InboxKit to Emelia: Everything You Need to Know](https://help.inboxkit.com/en/articles/41-connect-your-mailboxes-from-inboxkit-to-emelia-everything-you-need-to-know.md)